BushWrapz
CLAY BAR (200g)
ALL KITS ARE CUT SPECIFIC TO YOUR ORDER SO PLEASE ENSURE YOU HAVE SELECTED THE CORRECT MODEL AND VARIANTS.
READ OUR RETURN POLICY FOR MORE.
CLAY BAR (200g)
Fine
Bult Address
17 Bult Drive
Brendale QLD 4500
Australia
Additional items you may need:
Need some aftercare?
BUSHWRAPZ GLOSS WASH - PPF SAFE
$19.95
The ultimate secret weapon to a smooth install prep: BushWrapz Clay Bars! Designed specifically for the 4WD enthusiasts, these clay bars are essential to prepping your paintwork before installing our DIY Paint Protection Film (PPF) kits.
BushWrapz Clay Bars are designed to effortlessly remove light to medium contaminants such as dirt, grime, industrial fallout, and even embedded pollutants from your vehicle's paintwork. Restoring your paintwork from a gritty, rough surface back to a smooth, glass-like feel.
We have three different grades of Clay Bars for your convenience:
FINE - PURPLE: 65 grams
Suitable for light contaminants on paintwork or new vehicles.
MEDIUM - ORANGE (RECOMMENDED): 65 grams
Suitable for a moderate build up of contaminants.
HEAVY - GREY: 65 grams
Suitable for dirty or older vehicles that spend a lot of time on the road or on the tracks.
Not sure what clay bar you need? Check out our Clay Bar Pack which includes all 3 grades here!
And the best part? Our Clay Bars are easy-peasy to use. Simply use a heavily concentrated mix of one of our 4x4 washes or our Seal & Protect spray as lubricant to ensure the Clay Bar can move freely on the panel.
Never used a Clay Bar before? Check out this video here on How To use a BushWrapz Clay Bar
For Australian orders, allow an additional 2 -5 days for shipping.
For International orders please allow for 7 - 14 days for shipping.
- Pre-cut PPF Panels to fit both sides of your vehicle
- 1 x 60ml bottle of Install Solution Concentrate
- 1 x Application Squeegee
- 1 x Test piece of film
- 1 x Syringe (for bubble removal)
- Video tutorials - will be sent with a link via email after purchase
BushWrapz PRO needs to be installed by a professional installer due to the templates being slightly different. Being that BushWrapz PRO is a 10 year warranty film and ultimately going to be on your vehicle for 10+ years, these templates have been created to ensure a very custom and seamless look where possible. This requires bulking and trimming, therefore, not something we would recommend anyone DIY-ing.
BushWrapz PRO can be customised to suit and fit any vehicle and surface and is not limited to just the sides.
If you would like a quote on BushWrapz PRO, you will need to contact your nearest BushWrapz Certified installer for a quote.
You can find your nearest installer here.
Tough, removable, paint protection kits
A range of films and coverage options to suit all budgets
TIPS & TRICKS
BUSHWRAPZ PPF INSTALLATION
Our DIY kits are designed so that anyone can install them! With each kit you will receive a link to your vehicle's specific video installation instructions.
WATCH A TUTORIAL VIDEO
Testimonial
how long does it take to fit a door
FAQ
Yes! The key to our PPF being easy to DIY is due to our simplified templates. They have been specifically designed to align quickly and easily, removing all the fiddly parts of installing.
You will also receive specific video tutorials that take you step by step through fitting your kit.
We recommend you remove the film no longer than 12 months after the warranty expires. If you remove the film within this time frame, it comes off easily with the assistance of heat.
Our films come in a range of 1yr, 5yr or 10yr warranties depending on the level you select.
The biggest difference between Cape and Advance is their tear resistance and self healing properties. They have different adhesive and top coats, therefore different life expectancies.
Cape is designed to be installed for a trip, then removed. Think of it as a sacrificial layer, it’s there to be damaged.
Advance film is for those that want quality PPF at DIY prices. This film is far stronger and will comfortably last for years of travel.
We all know the Aussie heat can be unforgiving! We have tried and tested our films in Australia over the past 8 years in tough conditions, and we know it can take the brunt of the heat and UV.
Not only will the film repel up to 97% of UV Rays but more importantly it eliminates oxidisation which is what more commonly affects the appearance of your paintwork fading long-term.
Advance film is far more durable in the heat than Cape, we highly recommend only Advance film is fitted to horizontal surfaces.
We do recommend that if you live in a harsh climate such as WA or NT, that you upgrade to the BushWrapz Advance film. This is due to the harsh water.
If we don't have your snorkel listed as an option on our product page, that means we don't have it as a pre-cut option. You will need to customise the fender template to suit your snorkel. Same goes for clear view mirrors. Don't stress! We provide you with tutorial videos on how to do this.
Full bonnets and bumpers are such large and technical panels to install. They are not panels that we would recommend someone attempting themselves at home due to the multiple curves they have. If you would like BushWrapz applied to these panels, contact your nearest installer for a quote on these.
BushWrapz PRO needs to be installed by a professional installer due to the templates being slightly different. Being that BushWrapz PRO is a 10 year warranty film and ultimately going to be on your vehicle for 10+ years, these templates have been created to ensure a very custom and seamless look where possible. This requires bulking and trimming, therefore, not something we would recommend anyone DIY-ing.
If you would like a quote on BushWrapz PRO, you will need to contact your nearest BushWrapz Certified installer for a quote.
Reviews
Subscribe
Promotions, new products and sales.
Directly to your inbox.